MM elektrolab

DESCRIPTION:

• Rek Smart Sinus Inverters are used to power various devices with sinusoidal voltage with multiple operating autonomy, they do not have internal batteries but they are connected externally, they are intended for installation in cabinets.

• Inverter models operate on the following voltages:

24Vdc (R15) / 48Vdc (R22) / 110Vdc (R30)

• Extreme working conditions. Inverters are designed to operate in conditions of humidity, dust, high and low temperatures. All printed circuit boards are lacquered and protected (valid for models R15 and R22).

• Super-charger digital adjustable charger, from 26Ah to 200Ah with IU characteristic and temperature compensation (valid for models R15 and R22). This does not apply to the R30 model which does not have a charger.

• Smart technology enables high reliability, fully automated and independent system.

• Device life without repair over 10 years (does not apply to batteries).

• The inverters generate pure sine wave voltage at their output: 230V ~ (Models R15 and R22 have an optional 24V ~ output as well)

• Storing all alarms in real time (reading on the display).
• Wide input mains voltage range from 150V ~ to 290V ~ (without power degradation), this only applies to models R15 and R22, model R30 has an operating range of 180-265V ~.
• Possibility to select the operating mode, this only applies to the R30 model, which has a choice: On line (no pause to consumers when the mains supply fails, stable value of output voltage with a tolerance of 2%) / Off-Line (maximum pause up to 5mS, according to consumers in mains voltage failure situation, output voltage tolerance 10%).
• Does not require an external power adapter (applies to R15 and R22 models, this does not apply to R30 model.
• A large number of quality protections from all situations that may arise during operation and operation.
• Remote signaling relay card ,, Mains voltage failure ,, and ,, Alarm group ,,
• LAN card (Only for R15, R22 models) with accompanying software with SNMP and HTTP protocols, which enables real-time monitoring of UPS devices anywhere in the country and abroad.

R15 / 1500 VA / 1000 W

TECHNICAL CHARACTERISTICS:

Input voltage:	230V ac (od 190V~ do 290V~)
Input voltage frequency:	50Hz +/- 10 %
Output voltage-rated:	230 V / 24 V (6A)
Power:	1500 VA / 1000W
Battery:	24V (2 x 12V)
Autonomy:	Opcija

R22 / 2200 VA / 1600 W

TECHNICAL CHARACTERISTICS:

Input voltage:	230V ac (od 190V~ do 290V~)
Input voltage frequency:	50Hz +/- 10 %
Output voltage-rated:	230 V / 24 V (6A)
Power:	2200 VA / 1600W
Battery:	48V (4 x 12V)
Autonomy:	Opcija

R30 / 3000 VA / 2100 W

TECHNICAL CHARACTERISTICS:

Input voltage:	230V ac (od 175V~ do 265V~)
Input voltage frequency:	50Hz +/- 10 %
Output voltage-rated:	230 V
Power:	3000 VA / 2100W
Battery:	110 V (85-260V)
Autonomy:	Opcija

CONTACT INFORMATION

We are at your disposal for any questions!!!